Status LED's For Adtran Netvanta 3120
Possible Failures
Light
|
Status
|
Action to take
|
|
STATUS (STAT) |
Green (flashing) |
The unit is powering up. On power up the STAT LED flashes rapidly for five
seconds |
|
Green (solid) |
The power is on and self-test passed. |
|
Red (solid) |
The power is on, but the self-test failed or the boot
mode (if applicable) code could not be booted. |
|
ETH1 |
Off |
The port is administratively disabled or does not have a link. |
|
Green (solid) |
The port is enabled and the link is up. |
|
Amber (flashing) |
The port has activity (transmit or receive).
|
|
VPN |
OFF |
VPN is down. (Takes @ 90 seconds to go dark after loss of Internet
connectivity) |
|
Yellow (flashing) |
VPN is trying to connect (@ 20 second cycle then 2 sec red error and if
not sucessful, retry) |
|
Red (flashing) |
VPN connect error (see above) |
|
Green (solid) |
VPN is up (takes @ 60 seconds to go green after Internet connectivity) |
|
INET |
Off |
PPP or PPPoE is not connected, port has no IP address via DHCP, or IP is
static |
|
Off |
Comcast modem with static IP or like: WAN Ethernet connection down |
|
Green (solid) |
PPP or PPPoE is connected or IP has an address via DHCP. |
|
Green (solid) |
Comcast modem with static IP or like: WAN Ethernet connection up |
|
Green (flashing) |
WAN interface is attempting to obtain an IP address via DHCP. |
|
SWITCH 1-4 |
OFF |
The port is administratively disabled or does not have link. |
|
Green (solid) |
The port is enabled and the link is up. |
|
Amber (flashing) |
The port has activity (transmit or receive). |
For more information or to have your device listed please
contact Infotel Systems Inc
The story Behind "Status Lights"
