Status LED's For
HN404-CPi and HN408-CPi
Possible Failures
Light
|
Status
|
Action to take
|
| OK |
Dark / Flashing |
Power supply is not connected / system is starting up |
| FAIL |
Lit Red |
Contact carrier |
| A and B |
Dark |
Primary and optional secondary power supply is not connected. No power ! |
| 2BASE-TL PAIRS |
Dark |
Loop failure, contact carrier and advise. |
| 2BASE-TL PAIRS |
250ms ON, 250ms OFF for 1 minute then dark for 30 seconds. |
Loop has signal and is handshaking but can't get a sync. Call carrier and advise. |
- A 3MB connection uses 3 DSL loops = 3 lights @ 90% on.
- A 5MB connection uses 5 DSL loops = 5 lights @ 90% on.
- A 10MB connection uses 8 DSL loops = 8 lights @ 90% on.
For more information or to have your device listed please
contact Infotel Systems Inc
The story Behind "Status Lights"
