Follow Infotel Systems on Facebook Follow Infotel Systems on twitter


Westell 2110 DSL Modem
Normal Status Lights

Light
STATUS
Description & Suggested Action
POWERGreenThe Modem power is on. Look at the other lights to troubleshoot connectivity issues.
UnlitModem power off. // Turn the Modem on and try to re-connect.
READYGreen (Slow Flashing)The Modem is turned on and attempting to connect.
Green (Flashing Fast)The Modem is turned on, is attempting to connect and is downloading any needed information.
GreenThe connection between the Modem and Verizon Broadband is established.
Green/Red (Flashing)A communication failure. // Check the Verizon Broadband System Status.
RedModem test failed.
Red (Flashing)The Modem failed the power-up test. // Use the power switch on the back of the Modem to turn off the power, wait 15 seconds and then turn the Modem back on. Wait 45 seconds to allow the Modem to synchronize to the server and try connecting to the Internet.
UnlitModem power off. // After checking the power supply, see above.
ETHERNETGreenThe Modem and Broadband are connected and the data is transmitting at a normal rate.
UnlitNo link between the Modem and Computer. // Check the Verizon Broadband System Status, then troubleshoot the connection issue.

For more information or to have your device listed please contact Infotel Systems

The Story Behind "Status Lights"

Infotel Systems . 6008 Hermitage Rd . Richmond, Virginia 23228

All content copyright reserved (c) 2021. Content may not be used without written permission of Infotel Systems Inc